Kermetico HVAF and HVOF thermal spray equipment

Video

Videos Showing High Velocity Air Fuel Systems Thermal Spraying Corrosion and Wear Resistant Coatings

Video
4.9 (98%) 10 votes

How to Blast and Spray a Compressor Rod with a WCCoCr Coating in Only 20 minutes
Our AK-5-ID Rotating Coating System for Tungsten Carbide Coating of Internal Diameters Larger than 255 mm (10")
Internal Diameter Tungsten Carbide Coating for ID's as Small as 80 mm (3.12")
Can Your HVOF System Create a Tungsten Carbide Coating that is this Hard and Ductile?
Hard Chrome Replacement with HVAF Tungsten or Chrome Carbide Coatings
Weld Bead Protection with a Manual Thermal Spray Deposition of the HVAF Hastelloy Coating

Kermetico designs and manufactures three families of HVAF and HVOF thermal spray equipment.

Convertible HVOF and HVAF equipment:

  • C7 – an HVAF/HVOF gun for large parts
  • C6 – a general purpose HVAF-HVOF gun

Multi-purpose HVAF AK systems, with a variety of spray guns:

  • AK7 – a high-power gun for the thermal spray of large parts
  • AK6 – a gun to spray tungsten and chromium carbide onto a balanced mix of parts
  • AK5 – a compact gun to spray smaller parts, thin walls and complex surfaces
  • AK-ID – an 80 mm (3.15”) and larger internal diameter spray gun
  • AK-IDR – a rotating ID gun to spray 4” (100 mm) and larger bores
  • AK-HH – a handheld gun for on-site coating

Specialized equipment:

  • SL – a specialized gun for spraying low melting point metals
  • SP – a dedicated gun for the most efficient precious metals’ deposition
  • STi – a specialized gun for the deposition of titanium and Ti-alloy coatings

Additional equipment:

Kermetico, Inc. – HVAF and HVOF Material Science Excellence, Equipment Manufacture and Thermal Spray Coating Services Since 2006

We create equipment that helps material scientists, engineers and business managers achieve their goals.

We have installed more than 60 Kermetico HVAF systems in the USA, Europe, Japan and China.

Some of the systems are at work in Universities and National Labs, but most of them are used in production thermal spray shops.

We proudly design and produce our thermal spray equipment in California and install it all over the world.

You can visit our R&D center in Benicia to meet our designers and see our HVAF and HVOF equipment in action.

We also provide HVAF and HVOF thermal spray coating services to customers in North America – ourselves and through our network of partners.

Print page
Video